mCubed FanAmp
FanAmp is ontworpen speciaal voor 1 kanaals ventilator systemen, voor semi-passief gekoelde systemen of voor veiligheids ventilatoren in passief gekoelde systemen. De FanAmp kan eenvoudig aan gepast worden met 2 potmeters. FanAmp zorgt er ook voor dat u het moederbord signaal (7-12V) aan kunt passen naar een breder bereik van 0-12v. Deze mogelijkheid zorgt ervoor dat u met een moederbord tool een ventilator ook compleet kunt stilleggen. Prestatie: 25W permanent.
Engels:
FanAmp is especially designed for 1-channel-fan systems, for semipassive cooled systems and for safety fans in passive cooled systems. The FanAmp is easy adjustable with 2 poties. FanAmp makes it also possible to convert the mainboard signals (7-12V) into a wider range from 0-12V. This features makes zero fan speed controlable with any mainboard tool. The mainboard will also be released from supplying power to the fan. The Fanamp is connected separately with the power supply and can deliver 25W permanent power.
release the mainboard from supplying power for fans
separate power supply for fans and water pumps with permanent analog 25W
converts mainboard signals from 7-12V to 0-12V
an analogue thin foil sensor activates 100% speed over a certain temperature limit
Features:
2 knobs for temperature limit and standard speed
Supplies 25 Watt permanent and analog for fan or pump
Converts mainboard signals from 7-12V to 0-12V
Temperature limit
The hottest spot can be monitored with the thin foil temperature sensor. You can adjust with the right knob the exact temperature, where the FanAmp speed the fan up to 100%. If the temperature falls back under the limit, the speed will be reduced after a while (build-in delay/ Hysteresis).
Speed
If there is no input signal connected, the left knob adjusts the speed of the fan between 0 and 100%. If you have a fan, which is able to move very slowly (like the X12 with 50rpm), then you can make your fan inaudible.
Power
The FanAmp will be connected separately to the power supply. The voltage converter on the mainboard will be released and can provide their full power to the processor and other components.
With 25W permanent analog power you can also run several fans in parallel or control a 12V water pump. The short-time power (for example during start-up of a water pump) of the FanAmp is more than a 550W power supply can provide.
Signal spreader
Most of the mainboards can control the speed of the connected fans between 7V and 12V with either the BIOS or Mainboard tools. But with 7V a fan still runs fast.
FanAmp can convert the mainboard signal from 7-12V into 0-12V. It makes the usable range bigger and allows a complete stop of the fan.
Software control
With motherboard tools, like MSI Core Center or Speedfan you can add more options to control fan speed from zero to the maximum!
Package Contents
Control unit
1 analog temperature sensor
1 Motherboard Cable
Specifications
- dimensions: 60x37x16mm
- measurement range: 20°C to 120°C
- weight: 75g
- max. consumption: 10A
- max. power: 25W (analogue)
More info:
http://www.t-balancer.com/english/produkt_1kanal.htm