We are changing our newsletter system! Please (re)subscribe to our newsletter here: HighFlow Newsletter.

WORLDWIDE SHIPPING with GLS, DPD, PostNL & UPS. We ship to every country! Your country not listed? Please contact us.

Freeduino / Arduino LCD Keypad Shield

 - 
Onze prijs: 17,90 (14,79 excl. BTW)
Prijs in waardepunten: 74 punten
Punten verdiend: 1 punt

Freeduino / Arduino LCD Keypad Shield

This is a FIRST LCD Keypad shield board for Arduino or Freeduino board, which has unique features:

•Directly plug onto the Arudino board, no soldering or fly-wiring needed.
•A 16x2 HD44780 compatible LCD, White character & Blue backlight.
•Use Arudino LCD4Bit library.
•Joystick style Keypad with 5 pushbuttons, but only use ONE ADC PIN on Arudino.
What is included
ONE Arduino LCD Keypad Shiled V1.1, fully assembled & tested

Programming Notes
Modified LCD4Bit Interface -- To preserve the SPI port for future use, the Digital IO pins DB7-10 and pin11 & pin 12 used in the original LCD4Bit library have been moved to DB4-7 and pin 8 & pin 9 respectively. Please refer to:
Arduino LCD keypad shield v1.1 schematic

Joystick-Style Keypad -- To save the precious digital I/O pin resource. The Joystick style keypad only uses ONE A/D channel – AD0. The 5 pushbuttons are connected to AD0 via a 5-stage resistor voltage divider, please refer to the schematic for details.

LCD4Bit_mod Library --
1.Download the Modified LCD4Bit library HERE
2.Unzip the library inside arduino-0010/hardware/libraries/
3.Start the Arduino IDE and import the LCD4Bit_mod library.

4.You might run the example LCD4Bit_modExample.pde to test the LCD and the Joystick style Keypad.

Nog geen berichten gevonden.
Voeg als eerste een bericht toe!
Wij stellen dat zeer op prijs.

Schrijf een beoordeling

Andere klanten kochten ook

 - 
9,95 (8,22 excl. BTW)
 -   - 
3,50 (2,89 excl. BTW)
4,50 (3,72 excl. BTW)
 -   - 
12,95 (10,70 excl. BTW)
 - 
24,95 (20,62 excl. BTW)
 -   - 
21,95 (18,14 excl. BTW)
 -   - 
6,95 (5,74 excl. BTW)