Hailea Chiller HC-2200A - 3300 Watt
The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The smallest unit of the series, the Ultra 300 emits only 20dB of noise and is therefore even more quiet than a standard household refrigerator. The pricing of the new series is also pleasantly affordable.
New cool design
More robust materials for even longer lifespan
Lowered noise emissions
Suitable for continuous operation
This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem.
Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room.
We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation.
To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware.
CPU: 80W (standard) to 150W (overclocked)
GPU: 20W (small cards) to 150W (current models such as 8800)
MB: 10 to 20W per component
The added values of your system must not exceed the given cooling capability of the chiller. This version is suitable for virtually any system! Even multiple system can be cooled depending on the configuration!
Please note: This item cannot be shipped via TNT (too heavy).
Notes regarding compatibility: The chiller is shipped with fittings for tubing with an inner diameter of approx. 28 to 31mm). It is shipped with one pair of straight and one pair of 90° angled fittings. To use standard fittings an adaptor is needed. This adaptor is currently being developed.
Power: 2 HP
Cooling capacity: 3300W
Recommended coolant flow: 3000-6000 l/h
Dimensions: 634x468x590mm (LxWxH)
Heat exchanger material: Titanium
max. compressive load: 0,8bar
Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps
current demand: 7 A (50 Hz)
current drain: 1610 W
Please note that this device required a 16A fuse in its loop. Should an additional device be connected to this fuse the fuse may be triggered.
Extent of delivery:
4x Barbed fittings
2x Hose clamps
1x Outlet hose
English illustrated manual
Note for first-time users:
If you should have problems with your chiller please contact us via our forum before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product!
Note for aquarium-use:
The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least one power-lever higher that theoretically calculated
Nog geen berichten gevonden.
Voeg als eerste een bericht toe!
Wij stellen dat zeer op prijs.