The XFlow Copper series MagiCool has a special series of radiators on the market that are not as usual have inlet and outlet on the same end, but through the inlet at one end and the outlet at the other end, which in many systems, meaningful hose routing greatly simplified. At the same time, the radiators are ideal for use with only 27 mm thickness, if only relatively little space is available - thanks to copper fins with 16 FPI but still does not have to dispense with cooling capacity. The fans are either on one side or both sides - in the here offered single-variant, up to two pieces in a 120-mm format can be used.
When buying a xFlow Copper heat exchanger in addition to the height of 27 mm and the length should be noted in this single model it is 152 mm - plus ports that are here mounted directly on the end faces, they have for each a G1 / 4-inch thread. The necessary screws for attachment of a fan and for fixing the housing are included, as well as a decoupling frame for vibration damping.
Dimensions: 120 × 27 × 152 mm (W x H x D)
Weight: approx 370 g
Material: copper (fins), brass (chambers)
Compatible fans: both sides 1 × 120 mm
Fin density: 16 FPI
Pressure tested: 1.5 bar
Thread: 2 × G1 / 4 inch
Scope of supply:
4 × screws UNC 6-32 long (30 mm)
4 × screws UNC 6-32 short (5 mm)
1 × Rubber shroud
No posts found