Bitspower XYZ Reservoir (P5D)

Made from resistant acrylic, the Bitspower XYZ reservoir (P5D) is ready to hold up to 180ml of liquid. This reservoir is designed to help you save some space by being mounted directly on top of your 240 or 360 mm radiator with sturdy aluminum brackets. Its dual loop design gives room to a flow indicator which helps you make sure everything is running smoothly and gives the user more opportunity with tubing customization. The Bitspower XYZ reservoir (P5D) features a high-performance P5D pump, as well as Digital RGB LEDs that will bring an added spark to even the wildest case mods.

 LED Color : Digital RGB

LED Strip Management By Bitspower Digital RGB And Certified By ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, BIOSTAR VIVID LED DJ and Razer Chroma

Included :

• 1Set of BPTA-XYZ-RES-P5D 
• 1Pcs of TA-EXAIR-GS  
• 1Pcs of TA-90RE-GS  
• 1Pcs of TA-GFALP1622-GS
• 1Pcs of TA-GMALP1622-GS 
• 1Set of Mounting Screws/Accessories 

P5D Pump Spec

• Rated voltage：12V DC
• Power consumption：20W
• Maximum flow：14.5±15% L/min
• Noise：≤40dBA
• Ambient temperature：-25~70℃
• PWM：Yes
• MTBF：15,000 hours
• Warranty：2 years

Dimension(LxWxH) : 220x64.3x80 MM

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Touchaqua Digital RGB Multi Function Controller", which is available for purchase via the link below: https://www.highflow.nl/modding/leds/led-stations-controllers/bitspower-touchaqua-digital-rgb-multi-function-controller.html

I wanna show off, but what's the support I'd need?

◆DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar), and do not over 30 second. The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Last updated : 2022-06-07 13:20:06