HW Labs Nemesis GTR Radiators!

Product filters Product filters

Acrylic/Rigid Tools

Acrylic/Rigid Tools
 -   - 
45,90 (37,93 excl. BTW)
Acrylic/PETG Deburrer/trimmer - 12mm OD This tool is designed to debur the inner diameter and outer diameter of your extruded hard acrylic or PETG...
+

 -   - 
45,90 (37,93 excl. BTW)
Acrylic/PETG Deburrer/trimmer - 16mm OD This tool is designed to debur the inner diameter and outer diameter of your extruded hard acrylic or PETG...
+

 -   - 
13,95 (11,53 excl. BTW)
Alphacool now has a bending tool for different sizes, which makes laying and bending HardTubes super easy! HardTubes with a thickness of 12-14 mm as...
+

 -   - 
24,70 (20,41 excl. BTW)
The Alphacool deburring tool has three sharp edges, with  steel blades to deburr cut HardTube from the inside and remove rough sections. On the other...
+

 -   - 
12,95 (10,70 excl. BTW)
The Alphacool pulling saw for Plexi / PETG pipes is not an ordinary saw as you can see from the DIY store. Because the special saw blade with its fine teeth...
+

 -   - 
10,95 (9,05 excl. BTW)
The perfect solution for perfect curves in the Alphacool HardTubes is now available.   Simply slide the silicon insert into the plexiglass tube and...
+

 -   - 
8,95 (7,40 excl. BTW)
For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired...
+

 -   - 
4,20 (3,47 excl. BTW)
For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired...
+

 -   - 
4,95 (4,09 excl. BTW)
The perfect solution for perfect curves in the Alphacool HardTubes is now available.   Simply slide the silicon insert into the plexiglass...
+

 -   - 
3,90 (3,22 excl. BTW)
For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired...
+

 -   - 
4,95 (4,09 excl. BTW)
Bitspower Hard Tube Silicone Bending for ID 10MM - 1M - BP-HTSB10CL Features : 1. Easy To Use. 2. Only Compatible With Bitspower Hard Tube Series....
+

 -   - 
4,95 (4,09 excl. BTW)
Bitspower Hard Tube Silicone Bending for ID 12MM - 1M - BP-HTSB12CL Features : 1. Easy To Use. 2. Only Compatible With Bitspower Hard Tube Series....
+